Changes
From The Saab Tech Wiki
[[file:900_9-3_SID_6.jpg|none|Fig. 1 - SID with missing pixels]]
The SAAB Information Display (SID) with "missing" pixels. The problem gets worse over time until the display becomes unreadable. The cause is broken and intermittent cable connections between the display and a circuit board. Some displays can be restored by applying pressure to the cable using a rubber band or by resoldering the connections, others have to be replaced. To get access to the ribbon cable, the display has to be removed from the dash and disassembled.
==Disassembly==
Two metal screws and one L-shaped bracket (shown on the right) at the cable connector must be removed. The front and back of the plastic case are held together with small plastic tabs that can be released by pressing down, then the case can be opened and the circuit boards can be slid out.
[[file:900_9-3_SID_2.jpg|thumbnail|none|Fig. 1 - SID Disassembled]]
==Components==
A SID-3 after removal. The plastic case is held in the dash by four snaps, two on the top of the case, and two on the bottom (click picture for more detail). M4 screws were used to pull the SID out of the dash.
[[file:900_9-3_SID_4.jpg|thumbnail|none|Fig. 2 - SID Enclosure]]
===LCD===
