Changes
From The Saab Tech Wiki
1. Raise the car.
[[file:Front_Bumper_01.gif|thumbnail|none|Remove Bumper Skirts and Wing Liners]]
2. Remove both spoiler skirts.
5. Open the bonnet.
[[file:Front_Bumper_02.gif|thumbnail|none|Remove Grill and Headlamps]]
6. Remove the grille.
8. Remove the right-hand and left-hand headlamps and light clusters.
[[file:Front_Bumper_03.gif|thumbnail|none|Unplug Fog Lights and Temperature Sensor]]
9. Remove the two bolts securing the bumper to the car body.
1. Fit the bumper in place and tighten the two retaining bolts.
[[file:Front_Bumper_04.gif|thumbnail|none|Tighten Retaining Bolts and Connect Temperature Sensor]]'''Tightening torque: 39 Nm (29 lbf ft)'''
2. Plug in the temperature sensor connector.
3. Fasten the temperature sensor cable to the inside of the bumper by means of insulating tape.
[[file:Front_Bumper_05.gif|thumbnail|none|Refit Headlamps and Grill]]
4. Fit the headlamp washer hose to the bumper and secure it with clips.
8. Raise the car.
[[file:Front_Bumper_06.gif|thumbnail|none|Refit Wing Liners and Bumper Skirts]]
9. Carefully bend the wing liners back inside the edge of the bumper.
