1,076 bytes added,
08:44, 16 February 2010 =Removal=
1. Remove the wiper arms.
2. Remove the cover over the bulkhead.
3. Remove the wiper unit.
[[file:fan_resistor_1.gif|thumbnail|none|Removing air filter and unplugging ventilation fan]]
4. Remove the fresh-air filter.
5. Unplug the ventilation fan connector.
6. Remove the fresh-air filter frame.
7. Remove the ventilation fan cover.
[[file:fan_resistor_2.gif|thumbnail|none|Removing Ventilation Fan Cover and Resistor]]
8. Remove the screw securing the fan resistor.
9. Unplug the fan resistor connector.
=Replacement=
1. Plug in the fan resistor connector.
[[file:fan_resistor_3.gif|thumbnail|none|Replace Fan Resistor and Cover]]
2. Position the fan resistor and tighten the screw.
3. Refit the cover over the ventilation fan.
4. Refit the fresh-air filter frame.
[[file:fan_resistor_4.gif|thumbnail|none|Replacing filter frame, filter and fan connector]]
5. Plug in the ventilation fan connector.
6. Refit the fresh-air filter.
7. Refit the wiper unit.
8. Refit the cover over the space between the bulkhead partitions.
9. Refit the wiper arms.