Last modified on 15 February 2010, at 01:03

NG 900/9-3 Rear ARB

Overview

Replacing the rear ARB is one of the easiest and most effective methods of improving the handling of the 900 and 9-3. Mounting a thicker rear ARB reduces body roll in turns, improves stability and traction during acceleration, and reduces understeer. Rollbars of varying thicknesses are available from Genuine Saab.

Double Stacked Stock ARBs

A more inexpensive option is to double up stock rollbars. By using two stock ARBs and four grade 8 3/8" bolts and some 1/2" clamps you can cheaply improve you handling.

Doublestacked.JPG

Aftermarket ARB

Additional information about selecting the correct rear ARB can be found on the [Trolltuner site]

Installation

When removing the stock ARB the stock bolts will more than likely only come off when they snap due to rust and age.